IPC-80/125 is designed to coat the inside of pipe or tubing with an internal diameter of 3” to 5” or Ø 76mm to Ø 125mm. This machine has a paint spray tip that will coat a blast pattern of a circular 360° against the surface. The paint flow is regulated by a standard spray-tip TN-SSTC-6. This IPC-80/125 is manually pulled through the pipe at a predetermined speed based on paint film thickness and type of coating. Generally, any type of airless coating may be used. To obtain the best possible production, one man should operate the paint spray gun while another pulls the tool through the pipe or tubing.
There are four sets of buttons for I.D. 3” (Ø 76mm) to 5” (Ø 125mm)
Buttons by pipe size
| Button size | Pipe I.D. |
|---|---|
| 4 mm | Ø76 mm |
| 8 mm | Ø83 mm |
| 15 mm | Ø97 mm |
| 20 mm | Ø107 mm |
| 28 mm | Ø125 mm |